» Poradna » Hardware

Problemy s Intel(R) PRO/Wireless 3945ABG kartou Asus F3Jp

Odpovědět  |  Zobrazit bez stromu  |  Upozornit redakci  |  nových odpovědí: 3/3
 |   | 

Uz od pocatku bojuji s wifi pripojenim k me bezdratove siti, ktera ma zabezpeceni WPA-TKIP resp. nyni WPA AES-CCMP. Router Asus WL500g toto zabezpeceni podporuje a zminovana intel karta taky. Jenze se mi stava, ze v nepravidelnych intervalech dochazi k odpojeni a to z duvodu selhani overeni hesla (passphrase) zadane v profilu..... Zkousel jsem zmenit zabezpeceni z WPA-TKIP na WPA-AES, jenze zadna zmena. Taky jsem updatoval program a ovladace z intel. stranek, ale zdalo se mi to jeste horsi.... temer jsem se nepripojil.... Nechci menit typ zabezpeceni na WEP(z duvodu lehkeho prolomeni...).

Mate nekdo podobny problem? V Asus foru se objevil i dalsi uzivatel ze stejnymi problemy...... stejne zabezpeceni, typ NB atp... takze karta by nemela byt vadna......

Dik za rady

Odpovědi na otázku

 |   |   |  [85.135.92.---]

Zas tak lehke prolomeni neni. Navic staci dat nejslabsi vykon anteny.

Souhlasím  |  Nesouhlasím  |  Odpovědět
 |   | 

Nejake dalsi napady? Jak se zmeni bezpecnost pokud snizim interval zmeny klice na napr. jednou za hodinu? Mel jsem nastaveny 60s interval......

Doopravdy to musim nejak vyresit, nechapu, proc mi to dela problem na teto wifi karte a napr. na PCMCIA TP-Linku v druhem IBM T23 je to v pohode.

Jeste jsem se dival do Event Vieweru a tam jsem vybral posledni udalosti:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 26/12/2006
Time: 12:43:30
User: N/A
Computer: GEORGEUVNB
Description:
The system detected that network adapter \DEVICE\TCPIP_{E0155A25-4899-4556-80B1-2F045148235A} was connected to the network, and has initiated normal operation over the network adapter.

Event Type: Warning
Event Source: Dhcp
Event Category: None
Event ID: 1007
Date: 26/12/2006
Time: 12:43:33
User: N/A
Computer: GEORGEUVNB
Description:
Your computer has automatically configured the IP address for the Network Card with network address 0018DE8C220B. The IP address being used is 169.254.218.2.

Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 26/12/2006
Time: 12:44:08
User: N/A
Computer: GEORGEUVNB
Description:
The system detected that network adapter \DEVICE\TCPIP_{E0155A25-4899-4556-80B1-2F045148235A} was connected to the network, and has initiated normal operation over the network adapter.

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 32003
Date: 26/12/2006
Time: 12:44:16
User: N/A
Computer: GEORGEUVNB
Description:
The Network Address Translator (NAT) was unable to request an operation of the kernel-mode translation module. This may indicate misconfiguration, insufficient resources, or an internal error. The data is the error code.

Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4202
Date: 26/12/2006
Time: 12:44:25
User: N/A
Computer: GEORGEUVNB
Description:
The system detected that network adapter \DEVICE\TCPIP_{E0155A25-4899-4556-80B1-2F045148235A} was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

Event Type: Warning
Event Source: Server
Event Category: None
Event ID: 2504
Date: 26/12/2006
Time: 12:44:25
User: N/A
Computer: GEORGEUVNB
Description:
The server could not bind to the transport \Device\NetBT_Tcpip_{E0155A25-4899-4556-80B1-2F045148235A}.

Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 26/12/2006
Time: 12:45:08
User: N/A
Computer: GEORGEUVNB
Description:
The system detected that network adapter \DEVICE\TCPIP_{E0155A25-4899-4556-80B1-2F045148235A} was connected to the network, and has initiated normal operation over the network adapter.

Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 32003
Date: 26/12/2006
Time: 12:45:17
User: N/A
Computer: GEORGEUVNB
Description:
The Network Address Translator (NAT) was unable to request an operation of the kernel-mode translation module. This may indicate misconfiguration, insufficient resources, or an internal error. The data is the error code.

Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 26/12/2006
Time: 12:45:20
User: N/A
Computer: GEORGEUVNB
Description:
The system detected that network adapter \DEVICE\TCPIP_{E0155A25-4899-4556-80B1-2F045148235A} was connected to the network, and has initiated normal operation over the network adapter.

Event Type: Warning
Event Source: Server
Event Category: None
Event ID: 2504
Date: 26/12/2006
Time: 12:45:2

Souhlasím  |  Nesouhlasím  |  Odpovědět
 |   | 

**********continuing************
Event Type: Warning
Event Source: Server
Event Category: None
Event ID: 2504
Date: 26/12/2006
Time: 12:45:24
User: N/A
Computer: GEORGEUVNB
Description:
The server could not bind to the transport \Device\NetBT_Tcpip_{E0155A25-4899-4556-80B1-2F045148235A}.

Event Type: Information
Event Source: Service Control Manager
Event Category: None
Event ID: 7036
Date: 26/12/2006
Time: 12:45:57
User: N/A
Computer: GEORGEUVNB
Description:
The Ati HotKey Poller service entered the stopped state.

Event Type: Warning
Event Source: Dhcp
Event Category: None
Event ID: 1006
Date: 26/12/2006
Time: 12:46:16
User: N/A
Computer: GEORGEUVNB
Description:
Your computer was unable to automatically configure the IP parameters for the Network Card with the network address 0018DE8C220B. The following error occurred during configuration: The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. .

Event Type: Information
Event Source: Service Control Manager
Event Category: None
Event ID: 7036
Date: 26/12/2006
Time: 16:25:34
User: N/A
Computer: GEORGEUVNB
Description:
The Intel(R) PROSet/Wireless Service service entered the running state.

A ted me napadla jedna vec, kdyz jsem tento NB dostal, chtivy se potesit parametry "stroje" jsem nainstaloval HWInfo32 a spustil zjisteni konfigurace bla bla bla..... a skoncilo to v BSOD a po restartu opet a opet, takze jsem vratil system pomoci System Restore zpet a myslel si, ze to nenechalo zadne nasledky. Ale ted kdyz jsem se dival do Event Vieweru tak tam jsem nasel nasledujici chybu:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 26/12/2006
Time: 09:32:33
User: N/A
Computer: GEORGEUVNB
Description:
The HWiNFO32 Kernel Driver service failed to start due to the following error:
The system cannot find the path specified.

Asi to nema vliv na padajici pripojeni, ze?

Souhlasím  |  Nesouhlasím  |  Odpovědět

Související témata: Wireless



Určitě si přečtěte


Kingdome Come – recenze, mapa a další informace

Kingdome Come – recenze, mapa a další informace

Kingdome Come: Deliverance je unikátní hra z prostředí českého středověku. Zjistěte si všechny informace o této celosvětově úspěšné hře českých tvůrců.

13.  2.  2018 | Vojtěch Malý | 11


Aktuální číslo časopisu Computer

Jak vznikají filmové efekty

Test ATX skříní a externích disků

Znáte svá práva při reklamaci?

Průvodce první instalací NASu