Zdravím, potřeboval bych pomoc s netbookem který se mi dostal do ruky. Jedná se o malý netbook kde je android. Je to tak 2 rok co jsem dělal na flash na SIII a už ani nevím jak jsem to zvládl. Zde je největší problém asi moje angličtina.
Podle toho návodu se to snažím dělat. http://www.techknow.me/forum/index.php?topic=3546.0
WARNiNG! To flash without the fear of losing TouchScreen read and run this:
[TOOL] HcH WonderMedia Android Device Analyzer 1.0 [BACKUP]: here
Download@mediafire: Uberoid v12.1
Download@mediafire: Uberoid v12.1
Warning#1: While flashing, do not remove the SD card until it's done!
Warning#2: Connect the tablet to the charger while updating!
FAQ#0: HELP! FLASHING WENT WRONG!
Since v12b2 Uberoid default dumps your original env_uboot before it flashes on your device. When a first flash went wrong, you can recover your tablet most probably using this env_uboot file, it's basically a file that configs your tablet's hardware for Android. Use Dia_Betu's WMT_Editor or HcH's CHANGER that uses Robotop's ebin2txt from to read the backupfile SD:\ENV.BIN and convert it into a readable file. Then replace the values of the problematic parts of your tablet (e.g. touch screen or sound) on an option most close to your device specs (7inch, blue led for example).
FAQ#1: HowTo Flash a unknown or unlisted tablet model:
Before installing the ROM on a unknown / unlisted tablet model I recommend using UberoidTool by Dia Betu.
Step 1. Start UBEROIDTOOL.exe, prepare your SD Card to make a backup of your tablet environment settings. After selection of SD Card you have the option to format or not selected SD. On the "Prepare" step, the application copies a a backupscript to the SD card.
Step 2. Turn off your tablet and insert the SD.
Step 3. Power on the tablet ! Wait to see the script running!
Step 4. After 3 is done, remove the SD and insert it back into your pc.
Step 5. Save the backup folder into safe location.
On "Transfer" the application copy the Uberoid into SD Card with your original
tablet settings!
FAQ#2: HowTo flash the ROM normal, if you know your model:
From a temporary location / hard disk:
1. Extract archive to your local PC in a temporary location
2. Try to identify your tablet model (M009s/M003s/M012s/etc.)
3. Run CHANGER.BAT from your this temporary directory and see what models
there are. * type "FIND" <enter> to search for a model.
4. Put in the number of your model and press <enter>
5. CHANGER will ask you to copy to SD, press "Y" <enter>
6. Enter the drive letter of your SD as listed on the SDTOOL
7. Turn off your tablet
8. Insert SD
9. Turn on your tablet
10. Follow on screen instructions
11. Enjoy a better tablet
Direct extraction to SD card:
1. Extract archive to SD CARD (so a directory SD:\FirmwareInstall is present and the file wmt_scriptcmd in the sd root)
2. Try to identify your tablet model (M009s/M003s/M012s/etc.)
3. Run CHANGER.BAT from your SD root and see what models there are
4. Put in the number of your model and press <enter> (do not copy to SD)
5. Turn off your tablet
6. Insert SD
7. Turn on your tablet
8. Follow instruction
9. Enjoy a better tablet
FAQ#3: I have a no camera or a yellow screen when using the camera option and my tablet crashes on hibernation.
* You'll need to open the CHANGER.BAT and see which uzImage (kernel) your model uses, there are bascially 2 kernels, for green and for blue led devices, if your device has problems with e.g. the green kernel use the uzImage_blue as uzImage file on your next flash.
FAQ#4: I have no WLAN, keeps saying Unable to scan for networks.
* Use option 'RT3070' in changer, or any other WLAN related option filed under "x" for extra options in the CHANGER. These will most likely fix your wlan problem, these patches/settings can be used with any model.
FAQ#5: I get a "Force close" on the G-Sensor Calibration.
* setenv wmt.io.gsensor 1:3:4:0:1:1:-1:2:-1 should be changed to setenv wmt.io.gsensor 1:3:4:0:1:1:-1:2:-1:0:0:0
or using connectbot or terminal emulator:
1. su <enter> <allow>
2. wmtenv set wmt.io.gsensor 1:3:4:0:1:1:-1:2:-1:0:0:0 <enter> (or 1:3:4:0:1:1:-1:2:-1:-94:0:0 , currently known for 9.7" devices)
3. reboot
Udělal jsem pouze toto a už vůbec nevím jak mám dále pokračovat, zde je limit moje angličtina. Kdyby mi zde někdo napovědel tak bych rád.
TOTO JSEM POUZE UDĚLAL. Script najede na netbooku a pak když mam vyndat kartu tak netbooku přestane svítit displey a konec.
Step 1. Start UBEROIDTOOL.exe, prepare your SD Card to make a backup of your tablet environment settings. After selection of SD Card you have the option to format or not selected SD. On the "Prepare" step, the application copies a a backupscript to the SD card.
Step 2. Turn off your tablet and insert the SD.
Step 3. Power on the tablet ! Wait to see the script running!
Step 4. After 3 is done, remove the SD and insert it back into your pc.